Question about resetting re -registration Time on Yealink T46G
In your responce to problems with all the phones staying registered ,you wrote :
"Most SIP phone have the ability to "re-register" at certain time periods. If you set this a very short period "every two minutes" it would ensure that the phone stays online."
I am not sure which setting if any I need to change . I am guessing it is this :
Subscribe Period(Seconds) 1800..... But I want to make sure
Here are the advanced parameters for the Yealink T46G with their default settings.
Let me know what settings I should change to optimimize the phones to work with RingRoost.
Larry
<p class="p1"><span class="s1">Advanced Account Parameters Yealink T-46G</span>
Keep Alive Type DEFAULT
Keep Alive Interval(Seconds) 30
Local SIP Port 5060
RPort Disabled
SIP Session Timer T1 (0.5~10s) 0.5
SIP Session Timer T2 (2~40s) 4
SIP Session Timer T4 (2.5~60s) 5
Subscribe Period(Seconds) 1800
DTMF Type RFC2833
DTMF Info Type DTM-Relay
DTMF Payload Type(96~127) 101
Retransmission Disabled
Subscribe for MWI Disabled
MWI Subscription Period(Seconds)
Subscribe MWI To Voice Mail Disabled
Voice Mail -
Caller ID Source FROM
Session Timer Disabled
Session Expires(30~7200s) 1800
Session Refresher UAC
Send user=phone Disabled
RTP Encryption(SRTP) Disabled
PTime(ms) 20
Shared Line Disabled
Dialog Info Call Pickup Disabled
BLA Number -
BLA Subscription Period 300
SIP Send MAC Disabled
SIP Send Line Disabled
SIP Registration Retry Timer(0~1800s) 30
Conference Type Local Conference
Conference URI -
ACD Subscrip Period(120~3600s) 3600
Early Media Disabled
SIP Server Type Defaullt
Music Server URI -
Directed Call Pickup Code -
Group Call Pickup Code -
Distinctive Ring Tones Disabled
Unregister When Reboot Disabled
Out Dialog BLF Disabled